Next Previous Contents

3.0 Menu Bar Options

The following sections describe the menu bar options of ZTIP.

3.1 File

The majority of functionality of ZTIP is accessed through this menu bar option. The following subsections describe the functionality of each individual File menu option.

3.1.0 Configuration

• Customer:
  • Your customer ID. Same as the one that is used when logging into the Zonar-Web system.
• Upload Password:
  • This is the Upload password that has been issued. There is one Upload password per customer.
• Location:
  • Location of where the download is occurring from. Example (Seattle office, Everett office, etc).
• History List Size:
  • The size of the list that is used to store historical data.
• Post-scan Delay:
  • The amount of time in seconds that must elapse before another driver ID card may be read.
• Beep on Scan
  • Enables a beep to be sounded when a driver ID card has been read. Note: You must have speakers connected and setup correctly in order to hear the sound.
• Post-scan sound file:
  • Allows the selection of a sound file on the computer system to be played when the post-scan delay time has elapsed and another driver ID card may be read. A default sound will be played upon the post-scan time elapsing. Click on the '...' button to navigate to a sound file on the computer system. Click on the 'Play' button to listen to the sound file. Note: You must have speakers connected and setup correctly in order to hear the sound.
• No Server PING
  • Does not perform a server ping which is used for communication verification with the Zonar-Web server. If ICMP (Internet Control Message Protocol) ping packets are being blocked on your network, this option must be enabled in order to upload the inspection reports.
• Load at Windows Start
  • If checked, this option will start the ZTIP application when a user logs into the computer. If this option is not checked the application will have to be manually started by using the desktop icon. Important: If the current user is not an Administrative or Power User the user will not have the necessary WRITE/MODIFY access needed to setup this option. So even if the checkbox is checked, the setting will not be saved and the application will not start at login time.
• Store Config
  • Click on this button to store the currently configured settings.
• Cancel
  • Click on this button to cancel making no changes and close the configuration dialog.

3.1.1 Perform Test Upload

Use this option to perform a test upload to confirm communication between ZTIP and the Zonar-Web. If the test report uploads successfully, 'Test Successful.' is displayed in bold green letters in the main display. If communication is not established a message 'TEST: Invalid Error Code (-1).' will be displayed in the main display. Verify configuration information is correct and an internet connection is established. If problems persist contact support@zonarsystems.net.

3.1.2 Send Debug Information to Zonar

If problems arise, this option allows information pertaining to your ZTIP configuration and errors that may be occurring to be sent via email to Zonar Systems for analysis to help resolve the issue.

3.1.3 Exit

Exits the ZTIP application.

3.2 Window

The ZTIP dialog window itself may be stretched vertically to increase size. If the default size of ZTIP is desired after modifications have taken place, click on the 'Default Size' menu item.

3.3 Help

Help has a submenu item 'About'. About is provided to assist the user in identifying the Software Version and Firmware Version of the ZTIP application. This information is also useful to help assist in troubleshooting, since the problem may already be corrected on a newer version of software and an update is necessary.

• Software Version: version of the ZTIP application.
• Update SW (Software)
  • Click on this button to update the ZTIP application.
  • Note: In order for the Update SW option to function correctly, the user must have unlimited user rights, such as an Admin user, the updates write to Program Files\ZTIP which a restricted user cannot do, also you must be connected to the Internet.
• OK
  • Closes the About dialog.

Next Previous Contents